Friendswood TX pool replastering
Are you looking for Friendswood TX pool replastering? Then you need to contact JR Pool Plastering and Texas Gunite. These guys are some of the best pool professionals in the Houston area. They can help every pool owner have their dream swimming pool. Often we have a swimming pool already in our yard when we buy a house, or we install one just to realize later it isn’t quite what we wanted. JR Pool Plastering and Texas Gunite can help you get the pool of your dreams. They do a great job and communicating and implementing the customer’s ideas into the design of their pool.
Every pool they work on they treat at if it were their own. This is because they understand the importance of pools on the value of a home. So, they strive to make every step of the project as high quality as possible. These guys can renovate, remodel, resurface, and design your pool in a timely manner. If you are looking for a team of highly-skilled, talented, with state of the art pool equipment, then you need to contact them today. These guys will get you the pool and spa you have always dreamed of.
They also have been working on pools for about 20 years and have seen nearly everything there is to see when it comes to pools. So, if you are concerned that your pool might be too big of a project or wonder what materials they work with. Don’t worry, they have worked with many different materials and builds of pools. No matter what pool you have, they can still help you achieve the pool of your dreams.
What is Pool Replastering and Resurfacing?
From time to time, pools need to have their surfaces redone. This is often called replastering or resurfacing. The reason that pool surfaces need to be redone is that just like anything else, they can wear out. Most pool surfaces will only last about 5 to 20 years, and it will depend on the material you have. If you have quality material and your pool is built well, then the surface will last longer. Also, if you use the proper amount of chemicals in your pool, then you will also extend the lifespan of your pool.
However, there will always come a time when you need to resurface your pool. Even if you are doing everything right, it will still wear out over time. There are many methods to resurfacing a pool, and what method is used will depend on the build and material of your pool.
For an in-ground concrete pool, one method is to chip out the existing plaster. After all the old plaster is gone, then the professionals will sandblast the surface of your pool and add a bond coating. Once the surface is prepared, then it will be time to add the finish. The finish can consist of quartz, plaster, glass beads, pebble, or polished pool finish.
Overall the entire process of replastering and resurfacing will take about five to seven days. Although, if there is rain, then the project can take about two weeks or more because of delays.
When to Replaster and Resurface
There are a couple of good reasons why to replaster your pool. One of these reasons is that your pool surface has surpassed its lifespan. If this is the case, then you could start to see wear and tear the longer your wait. However, to keep your pool looking fresh and feeling great, you can replaster it. Replastering your pool at the end of its lifespan is a way that you can protect your investment.
Pools are a major investment in your property. This investment is important for the value of your home because a pool is a major part of the landscape. If your pool were to fall into disrepair, then that can take away from the value of your home. So, it is essential to keep it maintained. Luckily, with a little bit of resurfacing, you can keep your pool looking as good as new.
Here are some lifespans you may find for popular materials:
- Exposed pebble 15+ years
- White quartz 10+ years
- White plaster 5-15 years
- Polished pool finishes 5-15 years.
If you aren’t sure what kind of pool surface you have, then JR Pool Plastering and Texas Gunite can help. These guys can help you find out what kind of surface you have, how long it lasts, and how much it will cost to replaster it.
Wear and Tear
Although there is a lifespan to each pool surface, pool owners don’t like to follow it. Often many people enjoy getting the most out of their surface before changing. This is why they will wait until they see wear and tear on the surface of their pool. Once they see this, then they will contemplate a resurfacing job. This is some of the wear you can find after you surpass the lifespan of your pool, or if you tend to use it a lot:
- Peeling plaster
- Rough texture
- Stains that are difficult to remove
If you find any of these things on the surface of your pool, then it is time to replaster. This is because if any of these things go too long, then your pool will require repairs. Cracks and leaks will get worse with time, and you could risk damaging surrounding property. Also, rough texture and peeling plaster will make your pool unsafe to swim in and clog up your filters. So, if you are experiencing any of these things, contact JR Pool Plastering and Texas Gunite. They can help you with Friendswood TX pool replastering.
The best Friendswood TX pool replastering
Contact JR Pool Plastering and Texas Gunite today at (713) 729-5014, or you can drop by and visit their Houston location. You can also learn more about how they can help you achieve your dream pool by checking out their services. Give them a call today and get your Friendswood TX pool replastering done in time for summer.
Friendswood TX Fun Facts
- There are 266 acres of green space
- They host annual events every year
- This city was established in 1895
- For more fun facts about Friendswood TX, click here